- Project name: Turtlebot robot indoor navigation
- Dates: July 2013 -
- Degree: Summer Research Residence
- Authors: Ruben
- Contact: email@example.com
- SVN Repositories:
- Tags: ROS, navigation, turtlebot
- Technologies: kinect, pcl, openni, c++, cmake, ROS
- State: Ongoing
- 1 ROS Fuerte Installation on Ubuntu 12.04
- 2 Turtlebot installation
- 3 Navigation
- 4 Path Planning
- 5 Convert sensor_msgs/Range to sensor_msgs/LaserScan message
- 6 Stop and resume actual navigation in ROS navigation stack
- 7 Goals correction for navigation stack
ROS Fuerte Installation on Ubuntu 12.04
First we need to add the repository
sudo sh -c 'echo "deb http://packages.ros.org/ros/ubuntu precise main" > /etc/apt/sources.list.d/ros-latest.list'
and setup the keys
wget http://packages.ros.org/ros.key -O - | sudo apt-key add -
We need to refresh the cache of your package manager
sudo apt-get update
In our case, we decide to install ros-fuerte-desktop-full that is recommended in the ROS web, but you can also install other as explained on the web
sudo apt-get install ros-fuerte-desktop-full
Now we need to configure the enviroment variables
echo "source /opt/ros/fuerte/setup.bash" >> ~/.bashrc
For refresh the enviroment variables of your terminal you can reset it or type
The turtlebot installation is very simple, you only have to type in your terminal
sudo apt-get install ros-fuerte-turtlebot*
The feasible solutions are Dynamic Window and Potencial Field :
1.-Dynamic Window : is a velocity-based local planner that calculates the optimal collision-free ('admissible') linear and angular velocity for a robot required to reach its goal
2.-Potential-field : In the pontetial-field navigation each obstacle has an obstacle 'force field' for repelling the robot, and the goal has a attraction fiel
Dynamic window algorithm
1.- Calculate the desired velocities ( angular and linear ).
2.- Select the allowable velocities ( angular and linear ) , this is compute the dynamic window, after this step we have a allowable velocities range ( [ min linear, max linear ], [ min angular, max angular ])
3.- For each tuple [ v, w ] determine the closest obstacle
4.- Determine if the distance to the closest obstacle is within the robots braking distance.
5.- Now, we can calculate the score of this tuple, the velocities that are more near to desired velocities will get a more score
6.- Now we select the velocity that has the most score
7.- If the score is higher than a minimun score return this tuple, else the linear and angular velocities will be 0
In pseudocode (source)
BEGIN DWA(robotPose,robotGoal,robotModel) desiredV = calculateV(robotPose,robotGoal) laserscan = readScanner() allowable_v = generateWindow(robotV, robotModel) allowable_w = generateWindow(robotW, robotModel) for each v in allowable_v for each w in allowable_w dist = find_dist(v,w,laserscan,robotModel) breakDist = calculateBreakingDistance(v) if (dist > breakDist) //can stop in time heading = hDiff(robotPose,goalPose, v,w) clearance = (dist-breakDist)/(dmax - breakDist) cost = costFunction(heading,clearance, abs(desired_v - v)) if (cost > optimal) best_v = v best_w = w optimal = cost set robot trajectory to best_v, best_w END
In these experiments, the robot will try to reach the position (3,3) from the origin.
1. Simple scenario Simple navigation
2. A wall scenario Navigation with obstacle
3. A realistic scenario
Convert sensor_msgs/Range to sensor_msgs/LaserScan message
The main goal of this chapter is stop and resume the actual navigation, this can be useful when the robot need to wait for example to a person.
For achieve that, we need to modify the move base package and introduce a few lines. This lines only check if the navigation is stopped and then don't sending the velocity command. And for modify the state of the navigation, we create a new topic to change this value.
When you want to start the navigation stack, you must start the custom navigation stack that introduces this modifications, after you can change this value using the library libmb_sendskip.so that includes the class MB_robot::SendState that allows to change this parameter with the method sendState(bool state).