Objects recognition and position calculation (webcam)
Contents
Objects recognition
We have used the package find_object_2d which has been develop by Mathieu Labbé (Université de Sherbrooke). The program can recognizes objects in the scene using an image of the object. The program has a graphical user interface which allow to capture an image of the scene and save it.
In the screenshot that is shown above, we can see how the recognized object is within a boundary box which coincide with the corners of the object image.
The program provides several data of each found object in the scene. We will use the next data:
- Width of the object image (number of pixels).
- Height of the object image (number of pixels).
- Position of the corners of the object image in the scene.
Utilization of a new OpenCV version in ROS Electric
The previous package needs in order to compile the OpenCV version 2.4.3 or higher, but ROS Electric has the OpenCV version 2.3.1. We will install the OpenCV version 2.4.3, modify the package cv_bridge and modify the package find_object_2d.
Installation of OpenCV
First we will download the OpenCV version 2.4.3 by the official web. We will extract the content of the downloaded file in the personal folder. We will execute the next commands in a terminal in order to update the ubuntu packages:
sudo apt-get update
sudo apt-get upgradeWhen finish the update/upgrade, we will place us in the OpenCV folder in a terminal and execute the next commands in the terminal in order to compile:
mkdir build
cd build
cmake -D WITH_TBB=ON -D BUILD_NEW_PYTHON_SUPPORT=ON -D WITH_V4L=ON -D INSTALL_C_EXAMPLES=ON -D INSTALL_PYTHON_EXAMPLES=ON -D BUILD_EXAMPLES=ON -D WITH_QT=ON -D WITH_OPENGL=ON ..
make
sudo make installWe will execute the next command in the terminal in order to configure OpenCV:
sudo gedit /etc/ld.so.conf.d/opencv.confWe add the next code line to the opened file and save the changes:
/usr/local/libNow, we will execute the next commands in a terminal:
sudo ldconfig
sudo gedit /etc/bash.bashrcWe add the next code lines at the end of the opened file and save the changes:
PKG_CONFIG_PATH=$PKG_CONFIG_PATH:/usr/local/lib/pkgconfig
export PKG_CONFIG_PATHWe will restart the PC to finish the installation.
Modification of the package cv_bridge
We must modify the file "manifest.xml" of the package cv_bridge in order to avoid the use of the previous version of OpenCV. We will execute the next commands in a terminal:
roscd cv_bridge
sudo gedit manifest.xmlWe will delete or comment the next code lines of the opened file:
<depend package="opencv2" />
...
<rosdep name="opencv2.3"/>
Modification of the package find_object_2d
We must modify the file "CMakeLists.txt" of the package find_object_2d in order to avoid the use of the previous version of OpenCV for the compilation. We will execute the next commands in a terminal:
roscd find_object_2d
sudo gedit CMakeLists.txtWe will modify the next code line of the opened file:
find_package(OpenCV REQUIRED)for:
find_package(OpenCV 2.4 REQUIRED)We have to add the next code lines to the file "CMakeLists.txt" in order to use a external OpenCV library to ROS, if the file don't have this lines.
find_package(OpenCV "VERSION" REQUIRED)
include_directories(${OpenCV_INCLUDE_DIRS})
...
target_link_libraries("PROGRAM_NAME" ${OpenCV_LIBS})Position calculation
We will use the data provided by the package find_object_2d in order to calculate the approximate position of the objects towards the MYRAbot's arm coordinates. We have to know the next physical parameters:
- Position of the webcam towards the arm (h, d).
- Tilt angle of the webcam towards the horizontal (α).
- Perpendicular distance to the webcam lens of the objects when we take the capture (dZ0).
We have used the variation of area of the boundary box in order to calculate the distance between the recognized object and the webcam lens. The obtained equations are shown below, we have calculated the parameters using different known positions of an object:
Program to publish the position of the objects
First we will create some custom messages within the package "find_object_2d" in order to publish the position of the recognized objects in the scene. We will create the basis message that contains the identifier and the placement point of the recognized object. We will create a file named "Point_id.msg" with the content that is shown below:
int16 id
geometry_msgs/Point punto
We will create a file named "PointObjects.msg" with the content that is shown below, in order to contain an array with the previous messages for each recognized object:
Point_id[] objetoThe program subscribes the topic "objects" (published by "find_object_2d_node") and publishes the topic "point". We will create a file named "objects_detected.cpp" within the package "find_object_2d" with the content that is shown below:
#include <ros/ros.h>
#include <std_msgs/Float32MultiArray.h>
#include <opencv2/opencv.hpp>
#include <QTransform>
#include <geometry_msgs/Point.h>
#include <std_msgs/Int16.h>
#include <find_object_2d/PointObjects.h>
#include <find_object_2d/Point_id.h>
#define dZ0 450
#define alfa 40
#define h 310
#define d 50
#define PI 3.14159265
void objectsDetectedCallback(const std_msgs::Float32MultiArray& msg)
{
ros::NodeHandle nh;
ros::Publisher position_pub_=nh.advertise<find_object_2d::PointObjects>("point", 1);
find_object_2d::PointObjects p_objects;
find_object_2d::Point_id objeto;
p_objects.objeto = std::vector<find_object_2d::Point_id>(msg.data.size()/12);
for(unsigned int i=0; i<msg.data.size(); i+=12)
{
// get data
int id = (int)msg.data[i];
float objectWidth = msg.data[i+1];
float objectHeight = msg.data[i+2];
// Find corners Qt
QTransform qtHomography(msg.data[i+3], msg.data[i+4], msg.data[i+5],
msg.data[i+6], msg.data[i+7], msg.data[i+8],
msg.data[i+9], msg.data[i+10], msg.data[i+11]);
QPointF qtTopLeft = qtHomography.map(QPointF(0,0));
QPointF qtTopRight = qtHomography.map(QPointF(objectWidth,0));
QPointF qtBottomLeft = qtHomography.map(QPointF(0,objectHeight));
QPointF qtBottomRight = qtHomography.map(QPointF(objectWidth,objectHeight));
geometry_msgs::Point punto;
float widthTop = sqrt(pow(qtTopRight.x() - qtTopLeft.x(),2) + pow(qtTopRight.y() - qtTopLeft.y(),2));
float widthBottom = sqrt(pow(qtBottomRight.x() - qtBottomLeft.x(),2) + pow(qtBottomRight.y() - qtBottomLeft.y(),2));
float heightLeft = sqrt(pow(qtBottomLeft.x() - qtTopLeft.x(),2) + pow(qtBottomLeft.y() - qtTopLeft.y(),2));
float heightRight = sqrt(pow(qtBottomRight.x() - qtTopRight.x(),2) + pow(qtBottomRight.y() - qtTopRight.y(),2));
float dArea_0 = (objectHeight*objectWidth) - (((widthTop + widthBottom)/2) * ((heightLeft + heightRight)/2));
float dZ_0 = dZ0 + (dArea_0/10);
float dY_0 = (((480/2) - (((qtTopLeft.y() + qtTopRight.y())/2) + ((heightLeft + heightRight)/4)))*dZ_0)/585;
float beta_0 = atan2(dY_0,dZ_0);
objectHeight = objectHeight/cos((alfa*PI)/180);
float height = ((heightLeft + heightRight)/2)/cos(((alfa*PI)/180)-beta_0);
float dArea = (objectHeight*objectWidth) - (((widthTop + widthBottom)/2) * height);
float dZ = dZ0 + (dArea/38);
float dX = (((640/2) - (((qtTopLeft.x() + qtBottomLeft.x())/2) + ((widthTop + widthBottom)/4)))*dZ)/585;
float dY = (((480/2) - (((qtTopLeft.y() + qtTopRight.y())/2) + ((heightLeft + heightRight)/4)))*dZ)/585;
float beta = atan2(dY,dZ);
punto.x = dX;
punto.y = h-((dZ/cos(beta))*sin(((alfa*PI)/180)-beta));
punto.z = ((dZ/cos(beta))*cos(((alfa*PI)/180)-beta))-d;
//Validate detection
int paralelepipedo;
if (abs(widthTop - widthBottom) < 20 && abs(heightLeft - heightRight) < 15)
{
paralelepipedo = 1;
}
else
{
paralelepipedo = 0;
}
if (paralelepipedo == 1)
{
objeto.punto = punto;
objeto.id = id;
p_objects.objeto[i/12] = objeto;
}
}
position_pub_.publish(p_objects);
}
int main(int argc, char** argv)
{
ros::init(argc, argv, "objects_detected");
ros::NodeHandle nh;
ros::Subscriber subs = nh.subscribe("objects", 1, objectsDetectedCallback);
ros::Publisher position_pub_=nh.advertise<find_object_2d::PointObjects>("point", 1);
ros::spin();
return 0;
}
Compiling the program
We have to add the next code lines at the end to the file "CMakeLists.txt" of the package "find_object_2d", in order to compile and create the executable file:
rosbuild_add_executable(objects_detected src/objects_detected.cpp)
target_link_libraries(objects_detected ${LIBRARIES})We will execute the next commands in a terminal:
roscd find_object_2d
makeExecuting the program
We have to install the package "camera_umd" in order to launch our USB webcam. We will execute the next command in a terminal in order to launch the webcam:
rosrun uvc_camera camera_node- note: If we have plugged several USB webcams, we have to set the webcam that we want to use (default webcam is "/dev/video0"). We will execute the next command in a terminal in order to change the used device:
rosparam set uvc_camera/device /dev/video"DEVICE_NUMBER"We will create a file named "encontrar_objetos.launch" within the folder "launch" of the package "find_object_2d" with the content that is shown below, in order to launch the webcam, the find_object_2d program and our program:
<launch>
<node name="camera_node" pkg="uvc_camera" type="camera_node">
<param name="/device" value="/dev/videoNÚMERO_DE_NUESTRO_DISPOSITIVO"/>
</node>
<node name="find_object_2d" pkg="find_object_2d" type="find_object_2d">
<remap from="image" to="image_raw"/>
</node>
<node name="objects_detected" pkg="find_object_2d" type="objects_detected" />
</launch>
We will execute the next command in a terminal in order to start the launcher:
roslaunch find_object_2d encontrar_objetos.launchTo point objects (Choose)
We will use the previous program in order to control the arm to point the selected object. The program subscribes the topics "point" (published by the previous program), "selected_object" (where we publish the identifier of the selected object) and "pose_arm" (where the states of the arm are published). Also the program publishes the topics "move_arm" and "hand_arm" in order to control the arm. When we start the program, the arm goes to the initial position. When we publish the identifier of the selected object in the topic "selected_object" (we use the identifier 100 to return the arm to the initial position), the arm moves to point the object if it is present in the scene. Passed a short time, the arm returns to the initial position. We will create a file named "escoja.cpp" within the folder "src" of the package "brazo_fer" with the content that is shown below:
#include "ros/ros.h"
#include "brazo_fer/Servos.h"
#include "brazo_fer/WriteServos.h"
#include "brazo_fer/ReadServos.h"
#include "geometry_msgs/Point.h"
#include "find_object_2d/PointObjects.h"
#include "find_object_2d/Point_id.h"
#include "std_msgs/Int16.h"
#include "math.h"
#define PI 3.14159265
#define L1 104
#define L2 104
#define Lp 60
brazo_fer::Servos move, vel, pg, eg, cg;
find_object_2d::PointObjects p_objects;
int cont = 0;
int cont_obj = 0;
int nuevo_punto = 0;
int id_0 = 0;
int id_1 = 0;
double x = 0;
double y = 0;
double z = 0;
brazo_fer::Servos inversa(geometry_msgs::Point destino)
{
double z = destino.z;
double x = destino.x;
double y = destino.y;
y = y + z*tan(atan2(45,250));
int coordenadas_correctas = 1;
double alfa, beta, beta_a, beta_p, gamma, delta, delta_a, delta_p;
double z_p;
double L_a, L;
alfa = (atan2(x,z)*180)/PI;
z_p = sqrt(pow(z,2)+pow(x,2));
L = sqrt(pow(z_p,2)+pow(y,2));
L_a = sqrt(pow(y,2)+pow(z_p-Lp,2));
beta_p = atan2(y,z_p-Lp);
beta_a = acos((pow(L1,2)+pow(L_a,2)-pow(L2,2))/(2*L1*L_a));
beta = ((beta_p+beta_a)*180)/PI;
gamma = acos((pow(L1,2)+pow(L2,2)-pow(L_a,2))/(2*L1*L2));
delta_a = PI-(beta_a+gamma);
gamma = (gamma*180)/PI;
delta_p = acos((pow(L_a,2)+pow(Lp,2)-pow(L,2))/(2*L_a*Lp));
if (y<0) {
delta = ((2*PI-(delta_p-delta_a))*180)/PI;
}
else {
delta = ((delta_p+delta_a)*180)/PI;
if (isnan(delta)) {
delta = ((PI+delta_a)*180)/PI;
}
}
if (isnan(gamma))
{
coordenadas_correctas = 0;
}
::move.base = ((alfa+150)*1023)/300;
::move.arti1 = ((beta+60)*1023)/300;
::move.arti2 = ((gamma-30)*1023)/300;
::move.arti3 = ((delta-30)*1023)/300;
::move.pinza = 511;
::vel.base = abs(::move.base - ::pg.base)/5;
::vel.arti1 = abs(::move.arti1 - ::pg.arti1)/5;
::vel.arti2 = abs(::move.arti2 - ::pg.arti2)/5;
::vel.arti3 = abs(::move.arti3 - ::pg.arti3)/5;
::vel.pinza = abs(::move.pinza - ::pg.pinza);
if (coordenadas_correctas == 1 && (205 <= ::move.base && ::move.base <= 818) && (120 <= ::move.arti1 && ::move.arti1 <= 920) && ::move.arti2 >= 50 && ::move.arti3 <= 828) {
return ::move;
}
else {
std::cout<<"Error, invalid coordinates or unattainable point"<<std::endl;
::nuevo_punto = 0;
::id_1 = ::id_0;
return ::pg;
}
}
void indicar(geometry_msgs::Point indicado)
{
ros::NodeHandle n;
ros::Publisher move_pub_=n.advertise<brazo_fer::WriteServos>("move_arm", 1);
ros::Publisher hand_pub_=n.advertise<brazo_fer::WriteServos>("hand_arm", 1);
brazo_fer::Servos mover;
double x0 = indicado.x;
double z0 = indicado.z;
indicado.z = indicado.z - 100*cos(atan2(x0,z0));
indicado.x = indicado.x - 100*sin(atan2(x0,z0));
mover = inversa(indicado);
brazo_fer::WriteServos indicar;
indicar.posicion = mover;
indicar.velocidad = ::vel;
indicar.par.base = 1;
indicar.par.arti1 = 1;
indicar.par.arti2 = 1;
indicar.par.arti3 = 1;
indicar.par.pinza = 1;
move_pub_.publish(indicar);
hand_pub_.publish(indicar);
}
void home()
{
ros::NodeHandle n;
ros::Publisher move_pub_=n.advertise<brazo_fer::WriteServos>("move_arm", 1);
ros::Publisher hand_pub_=n.advertise<brazo_fer::WriteServos>("hand_arm", 1);
brazo_fer::Servos mover;
geometry_msgs::Point home;
home.x = 0;
home.y = 80;
home.z = 50;
mover = inversa(home);
brazo_fer::WriteServos inicio;
inicio.posicion = mover;
inicio.velocidad = ::vel;
inicio.par.base = 1;
inicio.par.arti1 = 1;
inicio.par.arti2 = 1;
inicio.par.arti3 = 1;
inicio.par.pinza = 1;
move_pub_.publish(inicio);
hand_pub_.publish(inicio);
}
void posicion(const brazo_fer::ReadServos& pose)
{
brazo_fer::Servos p = pose.posicion;
::pg = pose.posicion;
::eg = pose.estado;
::cg = pose.corriente;
if (::cont == 0)
{
home();
::cont = 1;
}
else if (::nuevo_punto > 8)
{
if (((p.base-15) < ::move.base && ::move.base < (p.base+15)) && ((p.arti1-15) < ::move.arti1 && ::move.arti1 < (p.arti1+15)) && ((p.arti2-15) < ::move.arti2 && ::move.arti2 < (p.arti2+15)) && ((p.arti3-15) < ::move.arti3 && ::move.arti3 < (p.arti3+15)))
{
ros::Time ahora;
ahora = ros::Time::now();
while (ros::Time::now() < (ahora + ros::Duration(1)))
{}
home();
::nuevo_punto = 0;
::id_1 = ::id_0;
}
}
}
void punto(const find_object_2d::PointObjects& point)
{
::p_objects = point;
if (::id_0 == ::id_1)
{
::cont_obj = 0;
::x = 0;
::y = 0;
::z = 0;
}
else
{
if (::id_1 == 100)
{
home();
::nuevo_punto = 0;
::id_1 = ::id_0;
}
else
{
int max = ::p_objects.objeto.size();
if (::nuevo_punto < 8)
{
for (int i=0; i < max; i++)
{
if (::p_objects.objeto[i].id == ::id_1)
{
::x = ::x + ::p_objects.objeto[i].punto.x;
::y = ::y + ::p_objects.objeto[i].punto.y;
::z = ::z + ::p_objects.objeto[i].punto.z;
::cont_obj = ::cont_obj + 1;
}
}
::nuevo_punto = ::nuevo_punto + 1;
}
else
{
if (::cont_obj == 0)
{
std::cout<<"Object is not in the scene"<<std::endl;
::nuevo_punto = 0;
}
else
{
geometry_msgs::Point punto_medio;
punto_medio.x = ::x/::cont_obj;
punto_medio.y = ::y/::cont_obj;
punto_medio.z = ::z/::cont_obj;
indicar(punto_medio);
::nuevo_punto = ::nuevo_punto + 1;
}
::id_1 = ::id_0;
}
}
}
}
void objeto(const std_msgs::Int16& id)
{
::id_1 = id.data;
}
int main(int argc, char **argv)
{
ros::init(argc, argv, "indicar_objetos");
ros::NodeHandle n;
ros::Subscriber pose_sub_= n.subscribe("pose_arm", 1, posicion);
ros::Subscriber point_sub_= n.subscribe("point", 1, punto);
ros::Subscriber object_sub_= n.subscribe("selected_object", 1, objeto);
ros::Publisher move_pub_=n.advertise<brazo_fer::WriteServos>("move_arm", 1);
ros::Publisher hand_pub_=n.advertise<brazo_fer::WriteServos>("hand_arm", 1);
ros::spin();
return 0;
}
We have to add the next line to the file "CMakeLists.txt" of the package "brazo_fer" in order to compile and create the executable file:
rosbuild_add_executable(escoja src/escoja.cpp)
We will execute the next commands in a terminal in order to compile and create the executable file:
roscd brazo_fer
makeWe will create a file named "escoja.launch" within the folder "launch" of the package "brazo_fer" with the content that is shown below, in order to launch the communication node witharduino, the previous launcher "encontrar_objetos.launch" and our program:
<launch>
<node name="serial_node" pkg="rosserial_python" type="serial_node.py" args="/dev/ttyACM0" />
<node name="indicar" pkg="brazo_fer" type="escoja" />
<include file="$(find find_object_2d)/launch/encontrar_objetos.launch"/>
</launch>
We will execute the next command in a terminal in order to start the launcher:
roslaunch brazo_fer escoja.launchTracking objects
The program subscribes the topics "selected_object" (where we publish the identifier of the selected object) and "pose_arm" (where the states of the arm are published). Also the program publishes the topics "move_arm" and "hand_arm" in order to control the arm. When we start the program, the arm goes to the initial position. When we publish the identifier of the selected object in the topic "selected_object" (we use the identifier 100 to return the arm to the initial position), the arm moves to track the object if it is present in the scene. We will create a file named "seguir_objetos.cpp" within the folder "src" of the package "brazo_fer" with the content that is shown below:
#include "ros/ros.h"
#include "brazo_fer/Servos.h"
#include "brazo_fer/WriteServos.h"
#include "brazo_fer/ReadServos.h"
#include "geometry_msgs/Point.h"
#include "find_object_2d/PointObjects.h"
#include "find_object_2d/Point_id.h"
#include "std_msgs/Int16.h"
#include "math.h"
#define PI 3.14159265
#define L1 104
#define L2 104
#define Lp 60
brazo_fer::Servos move_0, move_1, vel, pg, eg, cg;
find_object_2d::PointObjects p_objects;
geometry_msgs::Point punto_obj_0;
int cont = 0;
int cont_obj = 0;
int id;
brazo_fer::Servos inversa(geometry_msgs::Point destino)
{
double z = destino.z;
double x = destino.x;
double y = destino.y;
y = y + z*tan(atan2(45,250)); //Compensación para alcanzar la "y" intruducida, ya que la real es menor debido al peso del conjunto.
int coordenadas_correctas = 1;
double alfa, beta, beta_a, beta_p, gamma, delta, delta_a, delta_p;
double z_p;
double L_a, L;
alfa = (atan2(x,z)*180)/PI;
z_p = sqrt(pow(z,2)+pow(x,2));
L = sqrt(pow(z_p,2)+pow(y,2));
L_a = sqrt(pow(y,2)+pow(z_p-Lp,2));
beta_p = atan2(y,z_p-Lp);
beta_a = acos((pow(L1,2)+pow(L_a,2)-pow(L2,2))/(2*L1*L_a));
beta = ((beta_p+beta_a)*180)/PI;
gamma = acos((pow(L1,2)+pow(L2,2)-pow(L_a,2))/(2*L1*L2));
delta_a = PI-(beta_a+gamma);
gamma = (gamma*180)/PI;
delta_p = acos((pow(L_a,2)+pow(Lp,2)-pow(L,2))/(2*L_a*Lp));
if (y<0) {
delta = ((2*PI-(delta_p-delta_a))*180)/PI;
}
else {
delta = ((delta_p+delta_a)*180)/PI;
if (isnan(delta)) {
delta = ((PI+delta_a)*180)/PI;
}
}
if (isnan(gamma)) // si no hay solución
{
coordenadas_correctas = 0;
}
::move_1.base = ((alfa+150)*1023)/300;
::move_1.arti1 = ((beta+60)*1023)/300;
::move_1.arti2 = ((gamma-30)*1023)/300;
::move_1.arti3 = ((delta-30)*1023)/300;
::move_1.pinza = 511;
::vel.base = abs(::move_1.base - ::pg.base)/5;
::vel.arti1 = abs(::move_1.arti1 - ::pg.arti1)/5;
::vel.arti2 = abs(::move_1.arti2 - ::pg.arti2)/5;
::vel.arti3 = abs(::move_1.arti3 - ::pg.arti3)/5;
::vel.pinza = abs(::move_1.pinza - ::pg.pinza);
if (coordenadas_correctas == 1 && (205 <= ::move_1.base && ::move_1.base <= 818) && (120 <= ::move_1.arti1 && ::move_1.arti1 <= 920) && ::move_1.arti2 >= 50 && ::move_1.arti3 <= 828) {
move_0 = move_1;
return ::move_0;
}
else {
std::cout<<"error coordenadas no validas o punto fuera del alcance"<<std::endl;
return ::move_0;
}
}
void indicar(geometry_msgs::Point indicado)
{
ros::NodeHandle n;
ros::Publisher move_pub_=n.advertise<brazo_fer::WriteServos>("move_arm", 1);
ros::Publisher hand_pub_=n.advertise<brazo_fer::WriteServos>("hand_arm", 1);
brazo_fer::Servos mover;
double x0 = indicado.x;
double z0 = indicado.z;
indicado.z = indicado.z - 150*cos(atan2(x0,z0));
indicado.x = indicado.x - 150*sin(atan2(x0,z0));
mover = inversa(indicado);
brazo_fer::WriteServos indicar;
indicar.posicion = mover;
indicar.velocidad = ::vel;
indicar.par.base = 1;
indicar.par.arti1 = 1;
indicar.par.arti2 = 1;
indicar.par.arti3 = 1;
indicar.par.pinza = 1;
move_pub_.publish(indicar);
hand_pub_.publish(indicar);
}
void home()
{
ros::NodeHandle n;
ros::Publisher move_pub_=n.advertise<brazo_fer::WriteServos>("move_arm", 1);
ros::Publisher hand_pub_=n.advertise<brazo_fer::WriteServos>("hand_arm", 1);
brazo_fer::Servos mover;
geometry_msgs::Point home;
home.x = 0;
home.y = 80;
home.z = 50;
mover = inversa(home);
brazo_fer::WriteServos inicio;
inicio.posicion = mover;
inicio.velocidad = ::vel;
inicio.par.base = 1;
inicio.par.arti1 = 1;
inicio.par.arti2 = 1;
inicio.par.arti3 = 1;
inicio.par.pinza = 1;
move_pub_.publish(inicio);
hand_pub_.publish(inicio);
}
void posicion(const brazo_fer::ReadServos& pose)
{
brazo_fer::Servos p = pose.posicion;
::pg = pose.posicion;
::eg = pose.estado;
::cg = pose.corriente;
}
void punto(const find_object_2d::PointObjects& point)
{
::p_objects = point;
geometry_msgs::Point punto_obj_1;
if (::id == 100 || ::cont == 0)
{
home();
::cont = ::cont + 1;
}
int max = ::p_objects.objeto.size();
for (int i=0; i < max; i++)
{
if (::p_objects.objeto[i].id == ::id)
{
punto_obj_1 = ::p_objects.objeto[i].punto;
::cont_obj = 1;
}
}
if (::cont_obj == 0)
{
std::cout<<"Objeto no presente en la escena"<<std::endl;
}
else if (abs(punto_obj_1.x - ::punto_obj_0.x) > 20 || abs(punto_obj_1.y - ::punto_obj_0.y) > 20 || abs(punto_obj_1.z - ::punto_obj_0.z) > 20)
{
indicar(punto_obj_1);
::punto_obj_0 = punto_obj_1;
}
::cont_obj = 0;
}
void objeto(const std_msgs::Int16& id)
{
::id = id.data;
}
int main(int argc, char **argv)
{
ros::init(argc, argv, "seguir_objetos");
ros::NodeHandle n;
ros::Subscriber pose_sub_= n.subscribe("pose_arm", 1, posicion);
ros::Subscriber point_sub_= n.subscribe("point", 1, punto);
ros::Subscriber object_sub_= n.subscribe("selected_object", 1, objeto);
ros::Publisher move_pub_=n.advertise<brazo_fer::WriteServos>("move_arm", 1);
ros::Publisher hand_pub_=n.advertise<brazo_fer::WriteServos>("hand_arm", 1);
ros::spin();
return 0;
}
We have to add the next line to the file "CMakeLists.txt" of the package "brazo_fer" in order to compile and create the executable file:
rosbuild_add_executable(seguir src/seguir.cpp)
We will execute the next commands in a terminal in order to compile and create the executable file:
roscd brazo_fer
makeWe will create a file named "seguir.launch" within the folder "launch" of the package "brazo_fer" with the content that is shown below, in order to launch the communication node witharduino, the previous launcher "encontrar_objetos.launch" and our program:
<launch>
<node name="serial_node" pkg="rosserial_python" type="serial_node.py" args="/dev/ttyACM0" />
<node name="seguir" pkg="brazo_fer" type="seguir_objetos" />
<include file="$(find find_object_2d)/launch/encontrar_objetos.launch"/>
</launch>
We will execute the next command in a terminal in order to start the launcher:
roslaunch brazo_fer seguir.launchWe can see in this video the execution of this program in gazebo simlator.
